| Mounting flange |
I - ISO version |
| Torque at 100 bar (theoretical) |
255 Nm |
| Max. and min. evaporation (cm3/rev) |
16 cm3/rev |
| Factory specification for special version |
00 |
| Speed - max. temporary B. at 6.5 - 20 degrees |
5700 rpm |
| Motor size |
160 |
| Control pressure/current |
A - 15 bar (AC, AD, AH, HP, HPC) |
| Displacement volume up to 6.5 degrees (min) |
32 cm3/rev |
| Operating pressure - max. interrupted B. |
480 bar |
| Sensor selection |
N - None |
| Top performance - second temporary B. |
730 kW |
| Flow rate - max two-temporary B. |
550 l/min |
| Controller |
HP - Hydraulic, proportional |
| Motor model |
V14 |
| Shaft end |
D - DIN (ISO version) |
| Control signal |
E- External pressure (AX. AH, HO, HP) |
| Shaft seal |
V - PPS |
| Mass moment of inertia |
14.5 (x10-3 (kg m2) |
| Displacement volume up to 35 degrees (max) |
160 cm3/rev |
| Valve selection |
L - Flush valve |
| Speed - max continuous operation at 6.5 - 20 degrees |
5000 rpm |
| Throttle set (bore diameter in mm) |
3 - 1.0mm (standard) |
| Speed - max. two-phase B. at 35 degrees |
3400 rpm |
| Weight |
68 kg |
| Operating pressure - max continuous operation |
420 bar |
| Speed - max continuous operation at 35 degrees |
3000 rpm |
| Flow rate - max continuous operation |
480 l/min |
| Peak performance - continuous operation |
560 kW |
| Max. Power output |
335 kW |
| Speed - min continuous operation |
50 rpm |
