Hydraulic motor M+S Hydraulics MR-Q160COD
- Article no:
- 78361782
Comparison number:
EPRMQ160COD|EPRM-Q160COD|OMR160|RMQ160COD
| Name | Value |
|---|---|
| Min. starting torque at max. pressure drop daNm Intermittent | 37.0 daNm |
| Drive shaft | Cylindrical Ø1", feather key 1/4" x 1/4" x 1 1/4" BS46 |
| Max. Power output kW Continuous operation | 11.5 kW |
| Max. Return pressure with leakage oil line bar peak | 225 bar |
| Connections | BSPP screw-in thread |
| Max. Pressure drop bar Continuous operation | 175 bar |
| Shaft seal | High pressure |
| Connection type | Side connection |
| Manufacturer/article number | M+S Hydraulics MR-Q160COD |
| Max. Torque daNm Intermittent | 43.0 daNm |
| Max. Return pressure with leakage oil line bar Intermittent | 200 bar |
| Max. Inlet pressure bar peak | 225 bar |
| Max. Oil flow l/min Continuous operation | 60 l/min |
| Max. Pressure drop bar Intermittent | 200 bar |
| Max. Return pressure with leakage oil line bar Continuous operation | 175 bar |
| Interchangeable with | Sauer Danfoss OMR160 |
| Max. Oil flow l/min Intermittent | 75 l/min |
| Max. Torque daNm Continuous operation | 39.0 daNm |
| Max. Inlet pressure bar Intermittent | 200 bar |
| Max. speed rpm Intermittent | 470 rpm |
| Min. starting torque at max. pressure drop daNm Continuous operation | 32.0 daNm |
| Max. Pressure drop bar peak | 225 bar |
| Swallowing volume | 159.6 cm³/rev |
| Max. Starting pressure with unloaded shaft bar | 7 bar |
| Max. Power output kW Intermittent | 14.0 kW |
| Min. speed rpm | 10 rpm |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Max. Inlet pressure bar Continuous operation | 175 bar |
| Mounting flange | Square flange, four threaded holes |
| Max. speed rpm continuous operation | 375 rpm |