Hydraulic motor M+S Hydraulics MR125SHD
- Article no:
- 78361054
Comparison number:
101070
| Name | Value |
|---|---|
| Min. speed rpm | 10 rpm |
| Max. Inlet pressure bar Intermittent | 200 bar |
| Max. speed rpm continuous operation | 475 rpm |
| Leakage oil connection | with leakage oil connection |
| Max. Torque daNm peak | 37.0 daNm |
| Drive shaft | Toothed Ø25.32, BS2059 (SAE 6 B) |
| Min. starting torque at max. pressure drop daNm Continuous operation | 25.0 daNm |
| Max. Pressure drop bar Continuous operation | 175 bar |
| Warehouse | without bearing |
| Min. starting torque at max. pressure drop daNm Intermittent | 28.0 daNm |
| Manufacturer/article number | M+S Hydraulics MR125SHD |
| Max. speed rpm Intermittent | 600 rpm |
| Max. Oil flow l/min Continuous operation | 60 l/min |
| Swallowing volume | 125.7 cm³/rev |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Connection type | Side connection |
| Max. Starting pressure with unloaded shaft bar | 9 bar |
| Mounting flange | Oval flange, two mounting holes |
| Max. Pressure drop bar Intermittent | 200 bar |
| Shaft seal | High pressure |
| Max. Power output kW Intermittent | 14.5 kW |
| Max. Inlet pressure bar Continuous operation | 175 bar |
| Max. Oil flow l/min Intermittent | 75 l/min |
| Max. Power output kW Continuous operation | 12.5 kW |
| Max. Inlet pressure bar peak | 225 bar |
| Max. Torque daNm Intermittent | 34.0 daNm |
| Max. Return pressure with leakage oil line bar peak | 225 bar |
| Max. Return pressure with leakage oil line bar Continuous operation | 175 bar |
| Max. Torque daNm Continuous operation | 30.0 daNm |
| Max. Return pressure with leakage oil line bar Intermittent | 200 bar |
| Connections | BSPP screw-in thread |
| Max. Pressure drop bar peak | 225 bar |