Hydraulic motor M+S Hydraulics MR250SHD
- Article no:
- 78361843
Comparison number:
1510426|151-0426|1510726|151-0726|EPRM250SHD|OMR250
| Name | Value |
|---|---|
| Max. Torque daNm Intermittent | 47.0 daNm |
| Max. Inlet pressure bar Intermittent | 200 bar |
| Max. speed rpm continuous operation | 240 rpm |
| Connection type | Side connection |
| Max. Pressure drop bar peak | 200 bar |
| Max. Oil flow l/min Intermittent | 75 l/min |
| Max. Return pressure with leakage oil line bar peak | 225 bar |
| Max. speed rpm Intermittent | 300 rpm |
| Max. Inlet pressure bar Continuous operation | 175 bar |
| Max. Pressure drop bar Continuous operation | 110 bar |
| Interchangeable with | Sauer Danfoss OMR250 |
| Max. Torque daNm Continuous operation | 39.0 daNm |
| Max. Return pressure with leakage oil line bar Intermittent | 200 bar |
| Min. speed rpm | 10 rpm |
| Drive shaft | Toothed Ø25.32, BS2059 (SAE 6 B) |
| Max. Power output kW Continuous operation | 8.0 kW |
| Max. Pressure drop bar Intermittent | 140 bar |
| Swallowing volume | 250.1 cm³/rev |
| Max. Power output kW Intermittent | 9.5 kW |
| Min. starting torque at max. pressure drop daNm Continuous operation | 31.0 daNm |
| Max. Return pressure with leakage oil line bar Continuous operation | 175 bar |
| Shaft seal | High pressure |
| Max. Starting pressure with unloaded shaft bar | 4 bar |
| Manufacturer/article number | M+S Hydraulics MR250SHD |
| Min. starting torque at max. pressure drop daNm Intermittent | 48.0 daNm |
| Max. Oil flow l/min Continuous operation | 60 l/min |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Max. Inlet pressure bar peak | 225 bar |
| Mounting flange | Oval flange, two mounting holes |
| Connections | BSPP screw-in thread |