Hydraulic motor M+S Hydraulics MR315C
- Article no:
- 78361016
Comparison number:
1510417|93000310
| Name | Value |
|---|---|
| Max. Starting pressure with unloaded shaft bar | 3 bar |
| Max. Oil flow l/min Intermittent | 75 l/min |
| Min. starting torque at max. pressure drop daNm Continuous operation | 31.5 daNm |
| Connection type | Side connection |
| Manufacturer/article number | M+S Hydraulics MR315C |
| Swallowing volume | 315.7 cm³/rev |
| Max. speed rpm continuous operation | 190 rpm |
| Max. Inlet pressure bar Continuous operation | 175 bar |
| Max. Torque daNm Intermittent | 47.0 daNm |
| Max. Inlet pressure bar Intermittent | 200 bar |
| Max. Return pressure with leakage oil line bar peak | 225 bar |
| Interchangeable with | Sauer Danfoss 151-0717 OMR315 |
| Min. speed rpm | 10 rpm |
| Max. speed rpm Intermittent | 240 rpm |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Max. Pressure drop bar Intermittent | 115 bar |
| Max. Pressure drop bar peak | 150 bar |
| Max. Return pressure with leakage oil line bar Intermittent | 200 bar |
| Min. starting torque at max. pressure drop daNm Intermittent | 58.0 daNm |
| Connections | BSPP screw-in thread |
| Drive shaft | Cylindrical Ø25, feather key A8x7x32 DIN 6885 |
| Warehouse | without bearing |
| Max. Pressure drop bar Continuous operation | 85 bar |
| Max. Torque daNm Continuous operation | 36.0 daNm |
| Max. Torque daNm peak | 61.0 daNm |
| Max. Power output kW Intermittent | 8.0 kW |
| Max. Return pressure with leakage oil line bar Continuous operation | 175 bar |
| Shaft seal | low pressure |
| Leakage oil connection | with leakage oil connection |
| Mounting flange | Oval flange, two mounting holes |
| Max. Oil flow l/min Continuous operation | 60 l/min |
| Max. Inlet pressure bar peak | 225 bar |
| Max. Power output kW Continuous operation | 5.0 kW |