Hydraulic motor M+S Hydraulics MR400CD
- Article no:
- 78361666
Comparison number:
1510418|151-0418|1510718|151-0718|EPRM400CD|OMR400
| Name | Value |
|---|---|
| Min. starting torque at max. pressure drop daNm Continuous operation | 31.5 daNm |
| Max. Power output kW Continuous operation | 4.8 kW |
| Max. speed rpm Intermittent | 190 rpm |
| Connections | BSPP screw-in thread |
| Max. speed rpm continuous operation | 150 rpm |
| Max. Pressure drop bar Intermittent | 90 bar |
| Swallowing volume | 397.0 cm³/rev |
| Max. Oil flow l/min Continuous operation | 60 l/min |
| Max. Return pressure with leakage oil line bar peak | 225 bar |
| Max. Torque daNm Continuous operation | 38.0 daNm |
| Max. Inlet pressure bar Intermittent | 200 bar |
| Connection type | Side connection |
| Interchangeable with | Sauer Danfoss OMR400 |
| Max. Return pressure with leakage oil line bar Continuous operation | 175 bar |
| Min. speed rpm | 10 rpm |
| Max. Pressure drop bar peak | 115 bar |
| Max. Torque daNm Intermittent | 47.0 daNm |
| Drive shaft | Cylindrical Ø25, feather key A8x7x32 DIN 6885 |
| Max. Power output kW Intermittent | 6.8 kW |
| Max. Oil flow l/min Intermittent | 75 l/min |
| Max. Inlet pressure bar Continuous operation | 175 bar |
| Mounting flange | Oval flange, two mounting holes |
| Max. Return pressure with leakage oil line bar Intermittent | 200 bar |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Max. Inlet pressure bar peak | 225 bar |
| Max. Starting pressure with unloaded shaft bar | 3 bar |
| Max. Pressure drop bar Continuous operation | 65 bar |
| Min. starting torque at max. pressure drop daNm Intermittent | 50.0 daNm |
| Shaft seal | High pressure |
| Manufacturer/article number | M+S Hydraulics MR400CD |