Hydraulic motor M+S Hydraulics MS-W200C
- Article no:
- 78361202
Comparison number:
151F0225|151F0525|642L201|642-L201|EPMSW200C|EPMS-W200C|MSW200C|OMS200
Name | Value |
---|---|
Max. Inlet pressure bar Intermittent | 295 bar |
Min. starting torque at max. pressure drop daNm Intermittent | 56.0 daNm |
Max. Pressure drop bar peak | 295 bar |
Max. Oil flow l/min Intermittent | 90 l/min |
Classification | Hydraulics - Orbit/Torq/Gerotor motors |
Max. Oil flow l/min Continuous operation | 75 l/min |
Min. speed rpm | 6 rpm |
Max. Return pressure with leakage oil line bar Continuous operation | 140 bar |
Interchangeable with | Sauer Danfoss OMS200 |
Max. Torque daNm Continuous operation | 61.0 daNm |
Max. Inlet pressure bar Continuous operation | 230 bar |
Min. starting torque at max. pressure drop daNm Continuous operation | 47.0 daNm |
Swallowing volume | 200.0 cm³/rev |
Max. speed rpm Intermittent | 450 rpm |
Max. Inlet pressure bar peak | 300 bar |
Connections | BSPP screw-in thread |
Drive shaft | Cylindrical Ø32, feather key A10x8x45 DIN 6885 |
Max. Pressure drop bar Continuous operation | 210 bar |
Connection type | Side connection |
Max. Return pressure with leakage oil line bar Intermittent | 175 bar |
Manufacturer/article number | M+S Hydraulics MS-W200C |
Max. Torque daNm Intermittent | 72.0 daNm |
Max. Pressure drop bar Intermittent | 275 bar |
Max. speed rpm continuous operation | 375 rpm |
Max. Power output kW Continuous operation | 16.5 kW |
Max. Power output kW Intermittent | 22.0 kW |
Max. Starting pressure with unloaded shaft bar | 8 bar |
Mounting flange | Wheel flange |
Max. Return pressure with leakage oil line bar peak | 210 bar |