Hydraulic motor M+S Hydraulics MT725C
- Article no:
- 78361498
Comparison number:
EPMT725C|MT725C|OMT725
| Name | Value |
|---|---|
| Min. speed rpm | 5 rpm |
| Max. Power output kW Intermittent | 26.8 kW |
| Max. Return pressure with leakage oil line bar peak | 210 bar |
| Manufacturer/article number | M+S Hydraulics MT725C |
| Drive shaft | Cylindrical Ø40, feather key A12x8x70 DIN 6885 |
| Max. Pressure drop bar peak | 165 bar |
| Max. speed rpm Intermittent | 209 rpm |
| Connection type | Side connection |
| Max. Power output kW Continuous operation | 20.2 kW |
| Classification | Hydraulics - Orbit/Torq/Gerotor motors |
| Min. starting torque at max. pressure drop daNm Intermittent | 115.0 daNm |
| Max. Torque daNm Continuous operation | 130.0 daNm |
| Max. Inlet pressure bar peak | 300 bar |
| Mounting flange | Square flange, four fixing holes |
| Max. Torque daNm Intermittent | 147.0 daNm |
| Max. Pressure drop bar Intermittent | 140 bar |
| Interchangeable with | Sauer Danfoss OMT725 |
| Max. Starting pressure with unloaded shaft bar | 10 bar |
| Max. Oil flow l/min Continuous operation | 125 l/min |
| Max. Return pressure with leakage oil line bar Intermittent | 175 bar |
| Min. starting torque at max. pressure drop daNm Continuous operation | 95.0 daNm |
| Max. Inlet pressure bar Continuous operation | 210 bar |
| Max. Inlet pressure bar Intermittent | 250 bar |
| Max. Oil flow l/min Intermittent | 150 l/min |
| Swallowing volume | 724.3 cm³/rev |
| Max. speed rpm continuous operation | 172 rpm |
| Connections | BSPP screw-in thread |
| Max. Pressure drop bar Continuous operation | 120 bar |
| Max. Return pressure with leakage oil line bar Continuous operation | 140 bar |